The Metz range of extra heavy duty flooring is suitable for demanding traffic and physical environments. Applied at greater thickness for increased durability, Metz can provide a system that will stand the test of time.
Metz 10 Epoxy Concrete is an epoxy based polymer concrete. It is used to replace severely attacked concrete or can be applied to new concrete in areas subject to extreme mechanical stresses. Often used as an underlayment beneath other Metz monolithic flooring products.
Typical Uses: Metal Production Plants, Chemical Plants, Food Plants.
Metz 93PU-TG is an outstandingly tough, abrasion, temperature, impact and chemical resistant trowellable polyurethane flooring system used in a wide variety of industrial applications. Normal application thickness is 6 – 8 mm.
Typical Uses: Chemical Plants, Food Plants, Breweries, Dairy Industry.
Metz Korodur Monolithic Topping is a premixed (just add water on site) concrete topping mix laid 8-15mm thick over fresh concrete to produce extremely hard wearing floors.
Typical Uses: Workshops, Warehouses, Production Areas, Hangars.
Metz 33EN-TG is an epoxy novolac trowellable flooring formulation exhibiting greater resistance to highly corrosive chemicals than most epoxies. Normal applied thickness is 6 mm. Application is by hand or power trowel.
Metz 10EN is an epoxy novolac polymer concrete used to place over new or old concrete in areas subject to severe chemical attack. It can be used to cast pump plinths, kerbs etc without the need for further protection against chemical attack.
Typical Uses: Oil Refineries, Acid Plants, Mine Sites, Mineral Processing.